Solinst

Solinst 101 Series: P2 Probe Water Level Meters

Download        

       00961 1 894 243

Category:

Description

Water Level Meter Solinst Model 101 P2

For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter.

Operating Principles

Model 101 Water Level Meters use corrosion-proof stainless steel probes attached to permanently marked flat tape, fitted on a well-balanced reel. They are powered by a standard 9 volt battery.

The probes incorporate an insulating gap between electrodes.  When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

A sensitivity control allows the buzzer to be turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.

Reels

With a stand-alone design, convenient carrying handle, and sturdy probe holder, the standard reels are ergonomically designed for ease of use. They are robust and smooth running. The battery is housed in a convenient drawer in the front of the reel, allowing quick replacement. The reels are equipped with an on/off sensitivity switch, light, buzzer, battery test button, brake and a tape guide stored on the frame.

P2 Probe

The P2 Probe is shielded in design to reduce or eliminate false readings in cascading water. The probe consists of a stainless steel body with a neoprene heat shrink seal. It is not suitable for submergence to any significant depth. Its simple design makes it easy to repair.

Size: 0.55″ dia., 7.5″ long (14 mm x 190 mm)
Weight: ~7 ounces (200 g)

Polyethylene Tape

The Model 101 P2 Water Level Meter uses high quality polyethylene tape that reels smoothly, remains flexible and hangs straight in the well. Heat embossed marking each millimeter or 1/100 ft. allow accurate readings. The 3/8″ (10 mm) wide tapes come in lengths up to 1000 ft. (300 m).

Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. They make the tape very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

M2:  Feet and tenths: with markings every 1/100 ft.

 

Part# Product Description
100515 Model 101 water level meter with P2 probe & imperial increments, 100′
100289 Model 101 water level meter with P2 probe & metric increments, 30m
100517 Model 101 water level meter with P2 probe & imperial increments, 200′
101677 Model 101 water level meter with P2 probe & metric increments, 60m
100519 Model 101 water level meter with P2 probe & imperial increments, 300′
100290 Model 101 water level meter with P2 probe & metric increments, 100m
100521 Model 101 water level meter with P2 probe & imperial increments, 500′
101679 Model 101 water level meter with P2 probe & metric increments, 150m
100523 Model 101 water level meter with P2 probe & imperial increments, 750′
100572 Model 101 water level meter with P2 probe & metric increments, 250m
100524 Model 101 water level meter with P2 probe & imperial increments, 1000′
101681 Model 101 water level meter with P2 probe & metric increments, 300m

Additional information

Labels