Description
FOR: Hot dip galvanizing, hard chrome metalizing,paint, enamel coatings on steel | FOR: Electroplating, thin paint films, phosphating on steel |
Scale FM 0–80 mils | Scale GM 0–8 mils |
Tolerance: ±0.2 mils up to 4 mils
±5% of the reading over 4 mils |
Tolerance: ±0.04 mils up to 0.8 mils
±5% of the reading over 0.8 mils |
Scale F 0–2000 microns | Scale G 0–200 microns |
Tolerance: ±5 microns up to 100 microns
±5% of the reading over 100 microns |
Tolerance: ±1 micron up to 20 microns
±5% of the reading over 20 microns |
Accurate
- Certificate of Calibration showing traceability to PTB included with every gage
- Matching Calibration Standards and Procedures available for every model
- Highly wear resistant Carbide Probe for longest life and continuous accuracy
- Remove center of dial cover for easy calibration adjustment
- Conforms to national and international standards
Durable
- Extra rugged housing, not affected by mechanical shock, water, acid or solvents
- Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement
- Can be used fully supported or with only the front probe area contacting the surface
- Functions on a permanent rare-earth cobalt magnet
- No batteries/electronics
- 2 year warranty
Simple
- Positive visual and audible indicators to designate when thickness reading is established
- “V” grooves in probe housing and Gage base allow correct positioning on cylindrical objects
- Compact, lightweight, precisely balanced, independent of gravity – can be used in any position
- GO/NO-GO button can be pre-set for rapid measurement
- Probe contact and dial rotation all in a one-finger operation
- Furnished with wrist strap and instructions in a high quality leather case with belt loops for your convenience