Gentec UP52N-100H-QED-INT-D0: Thermal Detector for Laser Power Measurement up to 100 W With INTEGRA (USB) Module

Description

Key Features:

Modular Concept

Increase the power capability of your detector: 4 different cooling modules

HIGH PEAK POWER DIFFUSING ABSORBER

Perfect for pulsed beams with high energy density

Compact Design

106 mm thick

HIGH AVERAGE POWER

Measure up to 100 W of continuous power

Smart Interface

Containing all the calibration data

Measurement capabilities

• Maximum average power (continuous): 100 W

• Maximum average power (1 minute): 100 W

• Noise equivalent power¹: 15 mW

• Spectral range²: 0.266 – 2.5 μm

• Typical rise time³: 4 sec

• Typical power sensitivity⁴: 0.06 mV/W

• Power calibration uncertainty⁵: ±2.5 %

• Repeatability: ±0.5 %

  • 1. Nominal value, actual value depends on electrical noise in the measurement system.
  • 2. For the calibrated spectral range, see the user manual.
  • 3. With anticipation.
  • 4. Into 100 kΩ load. Maximum output voltage = sensitivity x maximum power.
  • 5. Including linearity with power.

Measurement capabilities (Energy mode)

• Maximum measurable energy¹: 1000 J

• Noise equivalent energy²: 0.25 J

• Minimum repetition period: 9 s

• Maximum pulse width: 371 ms

• Energy calibration uncertainty³: ±5 %

• • 1. For 360 μs pulses. Higher pulse energy possible for long pulses (ms), less for short pulses (ns).
  • 2. Nominal value, actual value depends on electrical noise in the measurement system.
  • 3. When single-shot energy calibration is purchased

Damage thresholds

• Maximum average power density¹: 100 kW/cm²

• Maximum energy density²: 8 J/cm²

• • 1. At 1064 nm, 10 W CW. May vary with wavelength and average power.
  • 2. At 1064 nm, 7 ns, 10 Hz. May vary with wavelength and pulse width.

Physical characteristics

• Aperture diameter: 52 mm

• Absorber: QED

• Dimensions: 89H x 89W x 106D mm

• Weight: 0.93 kg